Network policy with processing order 2 or above is not getting executed. Skip to main content. Find threads, tags, and users Comment Show 0. Current Visibility: Visible to all users. Hi, first of all, wrong section. Please change the tag of this question to a correct one. So, you need to disable it when booting into your system. Here are the steps:. After performing these steps, you should be able to access various features in your system, allowing you to troubleshoot the problem.
Thankfully, Windows 10 has a utility that is specifically designed to fix issues like this. Here are the steps to running an SFC scan:. The System File Checker will begin the scanning and repair process. Once it is complete, restart your computer and check if the error is gone. If it persists, try the next solution. The DISM scan process will now begin. Keep in mind that this usually takes about 20 minutes to complete. So, be patient and do not interfere with it. It is possible that the boot sector has been corrupted or deleted, which is why your computer is unable to read the installation setup in a repeated sequence.
To begin, follow the steps below:. After running the command lines above, you should be able to begin the Windows 10 installation process. So, we recommend that you run some diagnostic tests to identify bad sectors or damages. There are plenty of third-party tools that you can use to fix this problem. You can begin the process by following the instructions below:. It is possible that certain services are interfering with the update process.
As such, we recommend that you disable them on startup. Once you boot into the system, check if the Error 0xca is gone. If it is gone, then it is likely that one of the services is interfering with the update process. Expand the device category and right-click on the driver. Choose Update driver. Go to the device driver, which seems to be causing the issue, and right-click on it. Choose Uninstall device. Wait and let the process end. Now, close the window and check if the error is gone.
Next, click Uninstall updates and choose the update you recently installed, causing issues for your system. Finally, right-click on the update and click Uninstall. Let the process end, and then reboot your PC. We recommend you take backup of your system or recover your data with a powerful data recovery software. The command will scan and mark the bad sectors on the hard drive and fix the drive corruption. Once the process finishes, close the window, and restart your system.
Select the application which seems to be causing the error on your system, click on it, and select Uninstall. Wait until the process is completed. Once done, reboot the PC to see if the error persists. Next, under the System Protection tab, go to System Restore. Choose a restore point and click Scan for affected programs.
It will scan for the programs and files that will be affected during the process. Wait until the process ends. Close the window and then reboot your PC. Share 0. Tweet 0. Pin it 0. Leave a Reply Cancel reply Your email address will not be published. Related Posts.
0コメント